Guide
LED Drivers and Loads: Sizing, Power Factor, and Inrush
What a driver label really tells you, how many of them a circuit can carry, and why the inrush figure trips breakers that the running current never would.
Read guideGuides
Worked examples for lighting projects.
The reasoning behind the numbers: illuminance targets, the lumen method, spacing rules, power density allowances, driver and circuit limits, running cost, and retrofit payback.
Guide
Ceiling Layout and Installation: Grids, Ceiling Types, and Switch Zones
Turning a fixture count into positions that respect the ceiling grid, the structure, and the way people actually use the room.
Read guideGuide
Lighting Running Costs: kWh, Rates, Emissions, and What Controls Really Save
How to get from connected watts and hours to an annual bill you can defend, and where controls change the number most.
Read guideGuide
Lighting Retrofit Payback: Building a Case That Survives Finance Review
How to assemble energy, maintenance, incentive, and installed cost into a payback figure that holds up when someone checks it.
Read guideGuide
Residential Lighting Layout: From Room Type to Switch Positions
How to get from a room and an activity to a lumen requirement, a fixture count, and switch positions that make sense.
Read guideGuide
Commercial Lighting Compliance: Lux Targets, Power Density, and Control Credits
What a commercial lighting design has to prove: enough light on the task, not too much connected power, and controls that actually deliver the credited savings.
Read guideGuide
Warehouse High Bay Lighting: Fixture Count, Mounting Height, and Rack Shadows
Why warehouse lighting is a geometry problem first and a fixture problem second, and how to size high bay counts that survive a real rack layout.
Read guideGuide
Outdoor and Parking Lot Lighting: Pole Spacing, Uniformity, and Light Trespass
How to space poles so a lot reads as one lit surface, and how to keep the light off the neighbours and the sky.
Read guide